Login Form
Registration
Profile Informations
or login
Details
ORIGINAL DESIGN AND MANUFACTURERS
The flow plate & speed ramp bundle is a more cost effective way to achieve the most efficient traffic control solution. Whilst the flow plates provide a one directional flow of traffic, the speed ramp ensures vehicles travel over the flow plates at a controlled speed (10mph) .
Our SB14 bundle is a perfect solution for entrances and/or exits of car parks, business parks, premises or any where requiring one way traffic control. It is also an effective remedy to stop drivers using private roads/drive ways as cut throughs.
Specification
- Speed Ramp complete with end caps, centres and fixings (suitable for concrete and high grade tarmac)
- Flow plates complete with fixings (suitable for concrete and high grade tarmac)
- Not suitable for vehicles weighing more than one tonne per axel
- Easy bolt down installation
Our premium design has been manufactured for over 25 years, you will not find another manufacturer who has made them longer than us, as our design was the FIRST and ORIGINAL. We do not cut corners on the quality of our SB.14's tested for over a million uses, our plates also come with a 24 month gaurantee when installed to our recommendations !
Are the SB.14 flow plates suitable for sports cars?
Our SB.14 Standard plates are suitable for sports cars however, we recommend that our SB.22 75mm Speed ramp is used in conjuntion with our flow plates to ensure traffic is travelling over at the correct speed. The flow plates are a method of controlling the direction of traffic, not to calm traffic speeds. If cars are approaching too fast this may cause damage to the plates.
Can I lock the plates down for emergency vehicles?
The SB.14 Locking bar is available to temporarily lock the plates down to allow two way traffic such as, emergency vehicles to gain access from both directions. We do advise that these are only a temporary measure and must not be used as a permanent fixture.
Are the SB.14 Standard's suitable for Heavy Goods Vehicles?
These are not suitable for HGV's the maximum load is one tonne per axle. Please see our SB.14 HGV Low Flap which is suitable for both cars and HGV's
How many plates do I require?
Please see our SB.14 information sheet (below)
Attachments
You may also be interested in the following product(s)
-
3 Metre Fixed Height Restriction Barrier
Ex. VAT: £748.01 Inc. VAT: £897.61 -
4 Metre (Single Leaf) Combination Height Restrictor
Ex. VAT: £2,462.81 Inc. VAT: £2,955.37 -
Access Gate 3-6m Single Leaf Heavy Duty
Ex. VAT: £728.50 Inc. VAT: £874.20
